WIRE ROPE SLINGS
 
TRI-FLEX® Wire Rope Sling
 
Features

This is a three part wire rope sling developed to give the rigger the advantages of strength combined with greater flexibility. It was created to replace large diameter single part wire rope slings which proved awkward and stiff. Tri-Flex® Slings are now manufactured in sizes from 1 ton to 145 ton capacity. Steel erectors, millwrights and riggers use Tri-Flex® slings for everything from steel erection or machinery moving to any type of heavy lift. These slings are made in matching lengths.
US Patent #4,043,581

Specifications>>


GATOR-MAX™ Sling
 
Features

This is the strongest multi-part sling with great flexibility. It will develop its full strength on small pins with a D/d ratio of 1/1 where D is the pin and d is the sling body. (4/1 D/d when comparing the pin to the component parts.) For heavy lifting work this is the most efficient wire rope sling that meets all of the standards. The eyes have the wire ropes (12) laid in parallel so that there is no cross over and then they are wrapped with heavy duty material to keep them in position. It is an excellent choice when you have to use small pins. This sling was developed to meet conditions specified by the US Navy and the Wire Rope Technical Board Sling Manual.
US Patent #5,561,973 and Patent pending

Specifications>>

 

GATOR-LAID® Wire Rope Sling
 
Features

This is identical to the Gator-Max® sling with the parallel eyes except it has metal sleeves for the splice connection. This is the product when a big lift but shorter sling is required. It also has twelve parts of wire rope in the loop. The Gator-Flex® and Gator-Laid® products were developed in conjunction with the off-shore oil industry to provide the worlds best heavy lift wire rope slings. D/d ratios are the same as for the Gator-Max® sling. US Patent #4,240,659, CN # 1,082,755

Specifications>>

 

GATOR-FLEX® Wire Rope Sling
 
Features

This sling has a nine part body style but the eyes are crossed or interwoven so that no wrapping is necessary. The sling was developed in conjunction with riggers in the field that wished to create a sling for heavy lifts that could be visually inspected and have the highest flexibility possible in a multi-part wire rope sling. The D/d ratio of the sling body is 5:1 and the eye loop is 1:1 where D is the pin or load diameter and d is the sling body diameter. US Patent #5,561,973

Specifications>>

 

T&D ULTRA-FLEX Wire Rope Sling
 
Features

This wire rope sling is an extremely flexible product with great applications for general rigging purposes in the utility industry. It makes a fantastic choker sling especially when lifting poles. Development was through a committee composed of utility company workers and members of the SLINGMAX® design team. D/d ratios are the same as for the Gator-Flex® sling.
US Patent #5,561,973

Specifications>>

 

GATOR-FLEX® Nine Part Grommets
 
Features

Ultra flexible slings for that short heavy lift connection. These slings can be made shorter than standard multipart slings but maintain all of the advantages. The D/d ratio is 5:1 where D is the pin or load and d is the sling body diameter.
US Patent #5,561,973

Specifications>>

TRI-FLEX® Sling System

Features

This product is a combination of three Tri-Flex® Wire Rope slings wrapped together helically to form a nine part finished body sling. After a heavy lift is finished the product can be taken apart to form three individual Tri-Flex® slings for smaller lifting work. It has twelve parts of wire rope in the loop for greater strength than traditional nine part wire rope slings. US Patent #4,240,659 CN #1,082,755 British #2,029,796

Specifications>>

 

 


  


 


Home
  :  Profile  :  Synthetic Slings  :  Wire-Rope Slings  :  Lashings  :  Lifting Clamps & Equipments  :  Associated Products  :  Safety Products  :  Accessories  :  Slingset Sense  :  Choosing a Sling  :  Technical Bulletins  :  Photo Gallery  :  FAQ’s  :  Contact  :  Feedback  :  Sitemap


Copyright © 2004 KRYFS Laminations (P) Ltd. All rights reserved.